Friday,25-September,2020

 

Skip Navigation Links
Skip Navigation Links

               Prior to Independence a small steam driven reciprocating DG generator of 100 KW capacity was installed by the British at Ross Island in 1926.  Direct current DG Sets of 100 KW capacity was installed at Port Blair during 1929. After independence two steam turbine generating sets of 550 KW each were established during 1951 in the Power House at Chatham Island.  The boilers were operated on wood fuel and saw dust, which were the waste products of Chatham Saw Mill and later on switched over to Mangrove Wood which was used as fuel. This was the start of the alternating current power supply at Port Blair.

        Due to the geographical and topographical peculiarities of these islands, including separation by sea over great distances, there is no single power grid for all the electrified islands and instead a power house caters independently to the power requirements of an area.

          We work for 24 X 365 days with our aim for providing safe and uninterrupted power supply in whole Andaman & Nicobar Islands.

 
<<<<<<<<<<<<
For SMS alert
>>>>>>>>>>>>


Kindly Register Your
Mobile No
through CSC's or
Site Offices

 

Latest Updates

 

   

DO'S AND DONT ‘CHANGE DEFECTIVE ELECTRIC APPLIANCES /SWITCHES IMMEDIATELY’. ‘ALWAYS USE ISI MARK ELECTRIC APPLIANCES / SWITCHES / WIRING MATERIALS’. ‘REPLACE LOOSELY HELD SWITCHES BY FIRM ONES’ ‘CARRY OUT INTERNAL WIRING AS PER ENGINEERS ADVICES’. ‘ATTEND LOOSE CONTACTS IN TERMINALS AND INTERNAL WIRINGS IMMEDIATELY TO AVOID ELECTRICAL AND FIRING HAZARDS’. ‘HANDLE WITH CARE ELECTRICAL EQUIPMENTS’. ‘HANDLE ELECTRICAL EQUIPMENTS ON DRY SURFACE/ INSULATING PAD’. ‘PERIODICALLY CHECK THE ELECTRICAL APPLIANCES / WIRINGS SYSTEMS /SWITCHES FOR AVOIDING ANY FAULTS’. ‘SAVE ELECTRICITY’ ‘DON’T USE SUBSTANDARD ELECTRIC APPLIANCES / SWITCHES / WIRING MATERIALS’. ‘DON’T USE LOOSELY HELD SWITCHES IN WIRING SYSTEM’. ‘DON’T USE MORE INCANDESCENT LAMP’. ‘DON’T CARRY OUT INTERNAL WIRING WITHOUT SUPERVISION AND ADVICE OF AN ELECTRICAL ENGINEER.’. ‘DON’T ALLOW LOOSE CONTACTS OF TERMINALS AND WIRES IT MAY LEAD TO ELECTRICAL AND FIRE HAZARD.’. ‘DON’T VENTURE IDENTIFYING ELECTRICAL SUPPLY WITHOUT PROPER CURRENT TESTER.’. ‘DON’T USE HIGH WATTAGE LAMPS FOR STAIR CASE, TOILET AND LOBBY'S ETC’. ‘DON’T USE TWO PIN SOCKETS ‘. ‘DON’T ALLOW CHILDREN'S TO TOUCH ELECTRICAL APPLIANCES’. ‘DON’T OVERLOAD INTERNAL WIRINGS WHICH MAY CAUSE VOLTAGE DROP’. ‘DON'T WASTE ELECTRICITY.’  
 
   Last Updated on 23/08/2019  Designed & Developed by : SOVTECH